OURUIDA CO.,LTD
OURUIDA CO.,LTD Our Topic: Energy Saving, Environmental Protection, Safety and Intelligence. Our Aim: Working hand in hand to create great achievements. Our Vision: Touch China with Quality, Touch the
Add to Cart
DSP Control +IGBT Inverter +Handheld Digital display Induction metal bore heating treatment equipment
.Specifications :
| Type | DSP-50KW |
| Rated Output Power | 50KW |
| Rated Output Frequency | 10-40KHZ |
| Can expand frquency | 1-100khz |
| Overload Heating time | 45%/10min |
| Power Adjust Arrange | 1.5-100% |
| Coaxial Flexible cable length | 40M |
| Input Voltage | 360-420v 50-60hz |
| Max power | 50kw |
| Protection Level | IP54 |
| Environment Temperature | +5c--+50C |
| Cooling water flow | 21L/MIN |
| Cooling water Pressure | 4-8Bar |
| Weight | About 100kg |
Cost - effective induction heating brazing,quenching,mobile heating equipment●Full air-cooling + DSP control + IGBT inverter + Reactance analysis Maintain the normal properties of all bamac-atec series induction heating generators.
Ultra-small and ultra-light handheld transformator,the minimum weight
High-speed PID is competent for 1s constant temperature control.
Energy control function
Fast running mode, heating time can be less than 1s.
Wear-resisting air-cooled soft connection, water and electricity separation, long service life; The handheld transformator connection length is almost unlimited and can exceed 50m.
Magnetic flux limiting function
Energy concentration, rapid heating, current and power response.
The waterway does not enter the main engine cabinet.high reliability,water flow detection and protection.
Specific temperature or power curves can be set using a process program
●Level or pulse start and stop, no blind time.
Standard transformers can output 100% power in the interrupted process. 100% continuous operation is available as an option. 53.)
The control automatically adapts to a wide range of sizes and shapes of inductors.
1.DSP main processor, full digital product
2.PID temperature closed-loop control program that designed for prodution process and workpiece can achieve stable temperature control without overshoot.Capable of heating workpieces ranging from a few grams to several hundred tons
With an inert link transfer function, it can solve the problem of measurement delay of temperature signal and realize automatic temperature control without overshoot and overheat.The rate of temperature change is controllable.Rich enhancements and options for a variety of industrial occasions.
3.Rapid VS Slow: Second level fast temperature control VS A slow rate of temperature change over several days
Perfect match for fast cycle time control of production line.Full range of temperature change rate can be set from 0.1 °C / H - 1600 °℃ / S.
4.PID parameter automatic setting function, the realization of professional temperature control can not need professional theoretical knowledge of automatic control.
5.Energy control
The energy applied to the workpiece can be controlled and based on this energy temperature control, restriction and protection can be carried out to meet the requirements of high-level and complex process control.
Feedback:
Factory:
Package: